Protecting Electrical Cabinets With Air-To-Air Cooling

Posted September 7, 2023 by Noren Thermal

When your operation counts on electrical enclosures to safeguard sensitive circuitry and wiring, you understand how important they are to properly maintain. These cabinets help keep out liquids that threaten short-circuiting your equipment as well as invasive creatures that can nest inside. Left open, an enclosure could allow animals like squirrels to chew through wiring, doing an unfortunate amount of damage and leading to rapid work stoppages. But by closing off your cabinets, the waste heat that would dissipate to safer parts of your building now stays near its source. This means that without effective cooling, your applications can begin to overheat. To maintain your circuitry in the appropriate temperature ranges, explore air-to-air options for ambient cooling. These convenient products attach directly on top or the side of your cabinet to direct excess heat to a different location.

At Noren Thermal Solutions, we understand that the maintenance of excess heat waste may not be your area of expertise. That’s why we concentrate on easy-to-implement thermal management systems that allow you to get back to doing what you do best. We have more than half a century of experience working with companies like yours across a vast array of industries. If you are designing a new plant, we offer consulting services to help plan your heat management processes. We also sell products that help you make these plans a reality. When you learn about how ambient cooling can protect your electronics, you can place faith in your enclosures.

(more…)

Safeguarding Your Systems With Cold Plates

Posted September 1, 2023 by Noren Thermal

When your business relies heavily upon sensitive electronic equipment, protecting it at all costs becomes a chief concern. When you understand the harms that can cause your systems to break or overheat, you can begin to plan and protect against them. If your computers stop operating, not only does it require costly repairs, but your labor becomes unproductive as you wait for the repair to occur. That is if you can even obtain the replacement parts necessary in today’s supply chain climate. But by keeping the temperatures surrounding your chipsets in proper working condition, you can prevent overheating and continue to work productively.

At Noren Thermal Solutions, we understand how vital protecting your capital infrastructure is to the ongoing operation of your company. We have been helping businesses like yours manage their thermal waste for over half a century, creating custom solutions for a wide variety of applications. We know that protecting electrical equipment may not be your specialty, which is why we have made it ours. When you allow us to design a protective thermal management system, we allow you to get back to doing what you do best. By taking advantage of cold plates and heat sinks, we can passively transfer heat waste without requiring massive cooling costs.

(more…)

Protecting Your Equipment With Heat Sinks

Posted August 28, 2023 by Noren Thermal

If you own your own business, you understand how important protecting your machinery is to continuing your operation. Planning for possible harm can help you prevent a slowdown in production or costly accidents that affect equipment and labor. When your electronics overheat, they can stop working altogether due to an inability to properly control your temperatures. If you have a valuable chipboard begin to fry, it’s not guaranteed you will be able to secure a replacement for a while to come. If you are concerned about electrical fires and other overheating situations, talk to a team of thermal management experts. We can consult with your team to analyze your current cooling methods and discover if there is room for improvement. We could help cut cooling costs while increasing the protection you enjoy. If you are expanding a current operation, we can augment your existing processes or plan new ones from the beginning.

At Noren Thermal Solutions, we have over half a century of helping companies like yours take on their waste heat transfer needs. As you shift your data storage to a completely digital framework, the protection of your computer equipment becomes a primary concern for day-to-day operations. You can allow us to plan a system that keeps your temperatures in range so you can get back to what you do best. By taking the time to learn how Noren can implement a successful heat management strategy, you will be pleased to work with our team!

(more…)

Thermal Management Solutions For Data Centers

Posted August 25, 2023 by Noren Thermal

When your business relies upon sophisticated data centers for your day-to-day operation, protecting them from overheating is critical. Failure to anticipate damage from waste heat can cause significant time and unproductive manhours that zap your payroll. That is if you can even get the proper equipment necessary to perform the right repairs. In many instances, heat damage to sensitive circuitry can require total replacement of the equipment. To prevent this from happening, talk to a team of thermal management experts about your options for safeguarding your computers. We have the tools necessary to move waste heat out of electrical enclosures and toward a safer area.

At Noren Thermal Solutions, we have been doing business for over 55 years helping companies like yours manage the production of thermal waste. As the years go on, we find ourselves helping more and more clients take on the protection of their computer equipment. Because your data storage is so important to maintaining your operation, protecting it from any threat is a top priority. To help you best protect your machines, we provide consulting services and heat management products to implement our vision. With a heat sink or air-to-water unit, you can keep temperatures below the point where damage begins. By taking time to explore your thermal management options, you can move forward with planning your new data center.

(more…)

Air-To-Air Cooling For Electrical Enclosures

Posted August 23, 2023 by Noren Thermal

If your business relies upon sophisticated electronics, it is common to build a series of enclosures that keep them safe. Your electrical cabinets help keep away water that damages sensitive circuits as well as critters that love to nest and chew on wiring. But by closing off your electronics from the greater environment, the waste heat they generate stays close by. To prevent this situation from overheating and causing significant harm, you should plan a system that brings your temperatures into a desirable range. This is where our team can help plan a set of air-to-air ambient coolers that attach to your cabinet and transfer waste heat to a safer location.

At Noren Thermal Solutions, we have been helping businesses like yours safeguard their equipment from overheating for over 55 years. By designing a custom thermal management system, we can ensure your equipment is protected while you focus on the areas of your business that are your expertise. We combine extensive consulting services with an array of custom products that can address almost any equipment configuration. By learning more about the benefits of ambient cooling, you can feel assured that your electronics are in good hands!

(more…)

Cooling Your Electrical Systems With Cold Plates

Posted August 21, 2023 by Noren Thermal

Investing in sensitive electronic equipment comes with a series of concerns. Among them is protecting your investment from a series of hazards that can quickly degrade your machinery. If you experience dangerous overheating situations, your productivity can plummet while workplace safety diminishes. By planning for controlling your temperatures in a specific range, you can transfer waste heat to safer locations and keep your chips and motherboards safe. This means that the right thermal management system is vital to preventing the loss of your investment, expensive repair costs, and costly delays. In today’s climate, it is unclear if you could even receive the parts needed to repair your applications, so prevent this possibility by planning for unsafe conditions.

At Noren Thermal Solutions, we have been doing business for over 55 years helping companies like yours control temperatures in a variety of business applications. We know that the safeguarding of electrical systems may not be your area of expertise, which is why we step in to consult your practice and allow you to get back to what you do best. When you learn about the advantages of cold plates and heat sinks for keeping electronics cool, you can look forward to enjoying a productive system for years to come.

(more…)

Passive Heat Exchangers Offer Big Savings

Posted August 18, 2023 by Noren Thermal

When you operate your own business, exploring areas to save costs is always on top of your mind. If you operate machinery that produces significant heat waste, thermal management expenses can soar when you use an active air conditioning system. Keeping your machinery in a specific temperature band is critical to preventing lag in operation, fire hazards, and other concerns that come from overheating. By exploring how you can benefit from the laws of thermodynamics, you will discover that a passive heat exchange system can scale up without driving your energy bill. That’s why we offer air-to-water systems that absorb your heat to move it elsewhere and protect your electrical equipment.

At Noren Thermal Solutions, we offer cost savings without sacrificing the high quality of service that you demand. We do this by offering alternative options for managing waste heat that is not dependent upon outside energy demands. When you purchase a heat pipe or heat sink from our team, you know that the highest level of care is put into its design. We have more than half a century of experience working with companies like yours to create custom solutions to complex equipment arrangments. So book a consultation with our experts and discover the path to savings!

(more…)

Selecting A Heat Sink For Your Business

Posted August 16, 2023 by Noren Thermal

When you make a significant investment in computer equipment and other electronics to benefit your business, their safety becomes a top priority. This means that planning for the management of their waste heat can protect you from costly downtime, lag, and damage from overheating. Not only can failure to manage the temperatures of your chipsets affect your bottom line, but these situations can become safety hazards as well. To prevent electrical fires and other issues from overheating, talk to the experts at Noren about designing a thermal management system for your new equipment. We can take a look at your current setup or even help you design one from the ground up. We use the best materials possible to create products such as heat sinks that transfer energy away from your chipboards to a safer location. When you get a consultation from our team, you are well on your way to protecting your machinery.

At Noren Thermal Solutions, we understand how important protecting your capital infrastructure is to the daily operation of your business. We have been helping companies like yours for over fifty years design solutions for their waste heat generation. By relying on our expertise, you can get back to focusing on what it is you do best. Speak with one of our consultants, and we will inspect your current electronic setup. By selecting a heat sink from Noren, you can reduce lag and operate at top speeds.

(more…)

Preventing Overheating In Electrical Enclosures

Posted August 14, 2023 by Noren Thermal

To best protect your electronics and circuitry, you must often close the cabinets that warehouse them. When an electrical enclosure is open, it freely sends waste heat into the surrounding environment, but this also exposes your sensitive equipment to hazardous water damage or nesting critters. By closing your cabinets, you can prevent these dangers from coming inside but prevent waste heat from escaping. To prevent your equipment from overheating, you must install a thermal management system that transfers energy to a safer location. By working with our team, we can help you keep your equipment safe and prevent the stress that comes with overheating.

At Noren Thermal Solutions, we focus on protecting against thermal damage to your electronics so you can focus on what you do best. Working with companies like yours for over fifty years, we have developed a range of products to fit almost any size or configuration of electrical enclosures. If you are planning a new factory or would like us to inspect your current setup, we can assist at any step of the design phase.

(more…)

Protecting Your Data Center From Waste Heat

Posted August 11, 2023 by Noren Thermal

If you design and implement a new data center, managing your waste heat is critical to preventing downturns in your business. Overheating can lead to costly damages and create lag in network speeds. While waiting for repairs to be performed, you lose productivity among your workforce. And that is if you can even get replacement chipsets! Today’s chip shortages can often mean long waiting lists and no promise of available parts. But by reaching out to a trusted team of thermal experts, we can help anticipate your cooling needs and design a system to help you stay in business.

At Noren Thermal Solutions, we have half a century of experience helping companies like yours protect their equipment from overheating. The central role of data storage in today’s business landscape means we spend significant time helping clients like you protect their servers. To achieve this end, we support our consulting services with a product line to make our designs a reality. Heat sinks and air-to-water units help you keep your temperatures in the specific range for your computers to work the most efficiently. When you understand the benefit of these thermal management solutions, you can feel confident planning for the future!

(more…)